Chown Command: Change Owner of File in Linux

April 29, 2019

Introduction

The chown command changes user ownership of a file, directory, or link in Linux. Every file is associated with an owning user or group. It is critical to configure file and folder permissions properly.

In this tutorial, learn how to use the Linux chown command with examples provided.

How to Use the chown Command on Linux

Prerequisites

  • Linux or UNIX-like system
  • Access to a terminal/command line
  • A user with sudo privileges to change the ownership. Remember to run the commands with sudo to execute them properly.

Linux Chown Command Syntax

The basic chown command syntax consists of a few segments. The help file shows the following format:

chown [OPTIONS] USER[:GROUP] FILE(s)
  • [OPTIONS] – the command can be used with or without additional options.
  • [USER] – the username or the numeric user ID of the new owner of a file.
  • [:] – use the colon when changing a group of a file.
  • [GROUP] – changing the group ownership of a file is optional.
  • FILE – the target file.

Superuser permissions are necessary to execute the chown command.

In this guide, we tested the command examples with the chown version 8.28 in Ubuntu 18.04.2 LTS.

To check the chown version on your machine, enter:

chown --version

The output will look similar to this:

Determine version of chown in Linux

How to Check Ownership of a File in Linux

First, you need to know the original file owner or group before making ownership changes using the chown command.

To check the group or ownership of Linux files and directories in the current location, run the following command:

ls -l

An example output of the ls command looks like this:

checking ownership of a file in linux

How to Change the Owner of a File

Changing the owner of a file with chown requires you to specify the new owner and the file. The format of the command is:

chown NewUser FILE

The following command changes the ownership of a file sample from root to the user test:

chown test sample
Change the owner of the file with chown command.

Use the same format to change the ownership for both files and directories.

Change the Owner of a File With UID

Instead of a username, you can specify a user ID to change the ownership of a file.

For example:

chown 1002 sample2

Make sure there is no user with the same name as the numeric UID. If there is, the chown command gives priority to the username, not the UID.

Note: To check a user’s ID, run id -u USERNAME from the terminal.

Change Ownership of Multiple Linux Files

List the target file names after the new user to change the ownership for multiple files. Use single spaces between the file names.

In the following example, root will be the new owner of files sample2 and sample3.

chown root sample2 sample3

Combine file names and directory names to change their ownership with one command. For example:

chown root sample3 Dir1

Do not forget that the commands are case sensitive.

How to Change the Group of a File

With chown, you can change a group for a file or directory without changing the owning user. The result is the same as using the chgrp command.

Run the chown command using the colon and a group name:

chown :NewGroup FILE

The following example changes the group of the file sample3 from grouptest to group3.

chown :group3 sample3
example of Changing group of a file or directory with chown command

List multiple names of files or directories to make bulk changes.

Change the Group of a File Using GID

Similar to UID, use a group ID (GID) instead of a group name to change the group of a file.

For example:

chown :1003 sample

Change Owner and the Group

To assign a new owner of a file and change its group at the same time, run the chown command in this format:

chown NewUser:NewGroup FILE

Therefore, to set linuxuser as the new owner and group2 as the new group of the file sample2:

chown linuxuser:group3 sample3

Remember that there are no spaces before or after the colon.

Change Group to a Users Login Group

The chown command assigns the owner’s login group to the file when no group is specified.

To do so, define a new user followed by a colon, space, and the target file:

chown NewUser: FILE

The following example changes the group ownership to the login group of linuxuser:

chown linuxuser: sample3

Transfer Ownership and Group Settings from One File to Another

Rather than changing the ownership to a specific user, you can use the owner and a group of a reference file.

Add the --reference option to the chown command to copy the settings from one file to another:

chown --reference=ReferenceFILE FILE

Remember to type in the names of the files correctly to avoid the error message:

Transfer ownership and gropu settings between files with chown command.

Check Owner and Group Before Making Changes

The chown command --from option lets you verify the current owner and group and then apply changes.

The chown syntax for checking both the user and group looks like this:

chown --from=CurrentUser:CurrentGroup NewUser:NewGroup FILE

The example below shows we first verified the ownership and the group of the file sample3:

chown --from=root:group2 linuxuser:group3 sample3

Then chown changed the owner to linuxuser and the group to group3.

Check Owner Only

The option --from can be used to validate only the current user of a file.

chown --from=CurrentUser NewUser FILE

For example:

chown --from=root linuxuser sample3

Check Group Only

Similar to the previous section, you can validate only the group of a file using the option --from.

chown --from=:CurrentGroup :NewGroup FILE

Here is an example where we verified the current group before changing it:

chown --from=:group3 :group4 FILE

Remember to use the colon for both group names to avoid error messages.

How to Recursively Change File Ownership

The chown command allows changing the ownership of all files and subdirectories within a specified directory. Add the -R option to the command to do so:

chown -R NewUser:NewGroup DirNameOrPath

In the following example, we will recursively change the owner and the group for all files and directories in Dir1.

chown -R linuxuser:group3 Dir1

Chown Command and Symbolic Links

To change the owner of a symbolic link, use the -h option. Otherwise, the ownership of the linked file will be changed.

The following image shows how symbolic links behave when -h is omitted.

Change owner of symbolic link command.

The owner and group of the symbolic link remain intact. Instead, the owner and the group of the file textfile changed.

To push the changes to the link, run the chown command with the -h flag:

chown -h NewUser:NewGroup SymbolicLink

In the following example, we changed the owner and group of a symbolic link.

Change the owner of the symbolic ling group.

Display Chown Command Process Details

By default, the terminal does not display the chown process information. To see what happens under the hood, use one of the two command line flags:

  • The option –v produces the process details even when the ownership stays the same.
  • The option –c displays the output information only when an owner or group of the target file changes.

For example, if we specify the current owner as a new owner of the file:

chown -v linuxuser sample2

The terminal produces the following output:

Specify chown process details with this command.

Switch from -v to -c and there will be no messages in this case. This happens because there are no owner or group changes.

The information is particularly useful with the recursive chown command:

Recursive chown command issued in Terminal window.

In this example, the output lists all objects affected after running the command.

Suppress Chown Command Errors

To avoid seeing potential error messages when running the chown command, use the -f option:

chown -f NewUser FILE

The example below shows the error message for a non-existent file or directory:

List chown errors with this command.

Adding the -f flag suppresses most error messages. However, if you specify an invalid username, the error message appears:

Suppress errros with the -f option with chown command.

Conclusion

Now you know how to use chown command in Linux to change a file’s user and/or group ownership.

Take extra caution when changing the group or ownership of a file or directories.

Was this article helpful?
YesNo
Goran Jevtic
Goran combines his leadership skills and passion for research, writing, and technology as a Technical Writing Team Lead at phoenixNAP. Working with multiple departments and on various projects, he has developed an extraordinary understanding of cloud and virtualization technology trends and best practices.
Next you should read
Nmap Commands - 17 Basic Commands for Linux Network
May 14, 2019

Nmap stands for Network Mapper. It is an open-source tool for network exploration and security auditing. With ...
Read more
How to Use The APT-GET Command In Linux
May 6, 2019

Advanced Package Tool (APT) is a package management system used on Debian, Ubuntu and other Linux ...
Read more
How to List Users in Linux, List all Users Command
August 4, 2022

Linux OS is unique because of its multiuser characteristic. It allows multiple users on one system, at the ...
Read more
How To Use grep Command In Linux/UNIX
March 28, 2019

This guide details the most useful grep commands for Linux / Unix systems. After going through all the ...
Read more